Measurements:
Metric Standard
LOA: 13.72 m 45 ft
Beam: 7.01 m 23 ft
Min Draft: 1.3 m 52 in (Dagger Boards up)
Max Draft: 2.18 m 7 ft 2 in
Dry Weight: 6500 kg 14,330 lbs
Total Sail Area: 130.9998 m² 1,410.07 ft²
Mainsail: 81 m² 871.88 ft²
Headsail: 50 m² 538.20 ft²
Sail Inventory
Main – 80.3 sqm – Delta Voile – Sep 2018
Code Zero – 70 sqm – Delta Voile – Feb 2018
Code D – 160 sqm – Delta Voile – Feb 2018
Self tacking Jib – Technique Voile – 2014
Racing Genoa
Asymmetrical Spinnaker 140 sqm in ATN sock
Capacities and Tankage:
Fuel Tanks – 1 Starboard + 1 Port
Fuel Tanks: 130 L (34.3 gal) ea
Water Tanks: #2 220 L 58 gal
Holding Tank: 1 x 60 L on Starboard side
Liferafts: 2x Plastismo 4 man + Grab bags New May 2017
Propulsion:
Engine #1
Yanmar 3YM30 2004
Sail drive – SD20 Prop – Max prop EZ – 3 blade
Engine #2
Yanmar 3YM30 2004
Sail drive – SD20 Prop – Max Prop EZ – 3 blade
Upgrades and Replacements:
Victron Inverter/ Charger – 3000w/120A – Sep 2016
600W Solar Panels and Victron 150 MPPT controller – Sep 2016
Holding tank in Starboard head – 60 Liter – Sep 2016
2 – 5000w diesel powered Espersaucher Heating units, one in each hull connected to a total of 6 blowers and the hot water tank. This allows us to heat the spaces where we are or the whole boat, at the dock, underway or at anchor. – March 2017
1 Blower/ heater core connected into coolant loop of each engine to provide heat to cabin if either engine is running. – March 2017
Dual loop 40L Indel Hot water heater- March 2017
540 AH (3 x180) Lithium Iron Phosphate Batteries with Safty disconnect relay – April 2017
Victron BVM- 700 – April 2017
Port Alternator 80A and new Alternator controller – April 2017
Starboard Alternator 80A and new Alternator controller – April 2017
Upgraded cables from engine bays to house batteries to improve charging – April 2017
Badboy Wifi booster – April 2017
Replaced both VHF Antennas on Mast – April 2017
Victron 1200 W 120V inverter – April 2017
New Port Rudder -May 2017
Skegs added to both Hulls to protect the Saildrives – May 2017
Replaced both 2 blade Racing props with Max Prop EZ 3 Blade models- May 2017
Replaced continuous line furler with Profurl NEX 5 – May 2017
Upgraded all 3 NKE gyrographic displays to NKE Multigraphic – June 2017
Installed NKE Gyro Graphic in Master Bunk. – June 2017
Oceanair Screens/shades on 9 hatches – Sep 2017
Refrigerator isotherm September 2017
Indel portable Cooler/ Freezer 55 l – September 2017
Icom 801 SSB – Feb 2018
Icom 424 VHF – Feb 2018
Full rebuild of DC distribution using blue seas panels and blocks – Feb 2018
Fusion RA70 stereo – Feb 2018
Fanless PC w/ 19″ Monitor – Feb 2018
B&G Zeus 3 – 12″ at Nav station, Zeus 3- 9″ in cockpit, 4G Radar- spring 2018
Iridium Go – Spring 2018